Plastics

Kunststoffe

Pigments for the colouring of plastics generally have to accomplish with high technical requirements, regardless whether plastic films, profiles, cases or fibres should be coloured.

Good dispersing properties are necessary for the pigments owing to short dwell times and relatively low shearing forces of the converting machines as to reach quickly the final colour strength. They have to be of high heat resistance, do not migrate and being appropriately light and weather resistant.

Downloads

Find more information in our Application Technology Information within the download-area.

Notice The following shade cards are only approximately representable in EDP medium,
depending on individual technical equipment the shown shade card may differ from reality.

This information and our technical advice - wether verbal, in writing or by means of trials - are given in good faith but without any warranty and this also applies where proprietary rights of third parties are involved.

Our advice does not release you from the obligation to check its validity and to test our products as to their suitability for the intended process and uses. The application, use and processing of our products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility. Our products are sold in accordance with our General Conditions of Sale and Delivery.